d&b audiotechnik Z Series Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Stojaki i stojaki d&b audiotechnik Z Series. d&b audiotechnik Z Series 12 stron. Al flying adapter
Również dla d&b audiotechnik Z Series: Instrukcja montażu (14 strony), Instrukcja montażu (8 strony), Instrukcja montażu (7 strony), Instrukcja montażu (11 strony), Podręcznik olinowania (18 strony), Instrukcja montażu (10 strony)

d&b Z5388 Mounting instructions 1.2 en

Attaching the cabinet to the bracket

NOTICE!

Only use the supplied and specified screws [2], otherwise there a

risk of damaging the threaded inserts.

Always use the spring washers [3] and U washers [4] to prevent

the bolts from slackening.

Always place the rubber pads [5] between the bracket and the

cabinet to prevent the cabinet coating from scratching during

assembly and adjustment.

Tools required:

▪ Open-ended spanner/wrench (size #17)

1. Starting on one side, first align one hole of the rubber pad

with one threaded insert.

2. Insert one screw together with the spring and U washers.

3. Align the second hole of the rubber pad with the second

threaded insert.

4. Insert the second screw together with the spring and

U washers.

5. Tighten both screws.

↳ This will simplify the attachment of the rubber pad on the

opposite side.

6. On the opposite side, proceed in the same manner.