BlueSky Designs Mount'n Mover DP-T5 Instrukcja dołączania - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja dołączania dla Stojaki i stojaki BlueSky Designs Mount'n Mover DP-T5. BlueSky Designs Mount'n Mover DP-T5 4 stron. Tobii i-13

Drukuj stronę

Set up for IR Remote Control Access for the I-13 and I-16

IR Remote Control

Access Window

(Offset to the right or left of the IR window)

Attach DP-EXT to DP-1x2 and QCR

(8-32 x 2")

x4 screws

DP-1x2

Place DP-EXT over the DP-1x2 and use the four screws

to attach all three parts together. Note the countersunk

holes on the DP-EXT are facing up.

List of Parts

DP-1x2

QRP

(8-32 x 2")

Parts needed are the DP-T5, the DP-EXT (Extension Plate),and

the Quick Release Plate QRP (included with the Mount'n Mover)

DP-EXT

Counter sunk holes

Place the Quick Release Plate (QRP) over the DP-EXT

and attach to the threaded inserts in the EXT with four

(8-32 x 1/4") screws (labeled QRP to Device Plate)

Red Flag

QCR

DP-EXT

Attach QRP to DP-EXT

DP-EXT

assembled

extension

(DP-T5 + DP-EXT)

Place DP-1x2 over QCR

Two Counter sunk holes

Place the DP-1x2 over the

Quick Connect Receiver. Note

the counter sunk holes are at

the top and the red flag is on

the left

Mount to the Tobii Device

(8-32 x 1/4")

x4 screws

Slide

QRP

Slide the Extension up onto the

connecting grooves on the Tobii

plate until it "clicks" in place

page 3 of 4