d&b audiotechnik Ti10 Podręcznik - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik dla System głośników d&b audiotechnik Ti10. d&b audiotechnik Ti10 10 stron.
Również dla d&b audiotechnik Ti10: Podręcznik użytkownika (14 strony)
Drukuj stronę
1
2
3
Fig. 4: Assembly of a Ti10L line array
Ti10 Manual
Ti10L rigging procedure
Ti10L line arrays are set up using the Z5370 T Flying frame. The rigging
procedure follows the description given in the T-Series Rigging manual
which is provided with the T Flying frame. However, Ti10L and T10
cabinets have different front rigging mechanisms. The Ti10L front rigging is
equipped with hooks and fixed bolts instead of locking pins and hidden
behind a cover in cabinet color.
To attach a Ti10L cabinet to an array or to the T Flying frame, proceed as
follows:
4
Ti10L line arrays of up to 3 cabinets can be supported with the
Z5373 T Cluster bracket which allows an easy aiming of the array either
flown or mounted on a high-stand.
A detailed description of planning and designing T-Series arrays is given
in the technical information "TI 385 Line array design, ArrayCalc" which
is also provided with the T Flying frame. The d&b ArrayCalc simulation
software
www.dbaudio.com.
Ti10L, Ti10P cabinet options
The special color (SC) version of the cabinet is available in all colors of
the RAL color table. The connector type is NL4.
The weather resistant (WR) version is available in black only. It is
equipped with a fixed input cable.
NOTICE: The WR option enables operation of loudspeakers in
(1.1 en)
1. Slide out the Front links and the Splay link of the cabinet.
2. Set the Locking pin at the rear rigging of the upper
cabinet/frame to the desired position (splay angle).
3. Keep the cabinet at an angle of 90° to the upper
cabinet/frame.
4. Insert the Front links into the front rigging of the upper cabinet
(1)
5. Slowly lower the cabinet and make sure the hooks rest in the
bolts (2).
6. Lift the back of the cabinet (3) and hook the Splay link over the
preset Locking pin of the upper cabinet/frame (4).
7. Insert the second Locking pin (safety pin) to secure the Splay link
of the cabinet.
can
be
downloaded
changing ambient conditions, however it is not intended to
enable permanent, unprotected operation of loudspeakers
outdoors.
- Provide an additional cover over the loudspeakers.
- Aim the cabinets either horizontally or with a downward
tilt.
from
the
d&b
website
Page 5 of 10
at