Bluesound B100S Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz multimedialny Bluesound B100S. Bluesound B100S 10 stron.

Drukuj stronę

1. Getting Started

ATTENTION!

Please ensure that the B100S is powered off or unplugged from the mains power outlet before making any connections. It is also advisable to power

down or unplug all associated components while breaking any signal or AC power connections.

STATUS INDICATOR

Below is a table of the LED blink codes and their corresponding

descriptions.

LED BLINK

Short blue flash, then red

Alternate flashing red and green

Flashing green

Solid red

Red pulse

Flashing red

Solid white

White pulse

Solid blue

Flashing blue

2 LAN/USB

LAN

• LAN connection must be setup for wired connection to be

established. Set up a Wired Ethernet broadband router with

broadband internet connection. Your router or home network

should have a built-in DHCP server to consummate the

connection.

• Using a standard straight-through Ethernet cable (not supplied),

connect one end of the Ethernet cable to the LAN port of your

wired Ethernet broadband router and the other end to B100S'

LAN port.

CODE DESCRIPTION

Powering up, rebooting the unit

Upgrading...

Connecting to network shares

Cannot boot; drive error

Upgrade mode

No internet gateway

Factory reset in progress

Indexing

Software update available

Connected to Network – ready to

use with Bluesound App

Mute mode

IDENTIFICATION OF CONTROLS

NOTES

• Bluesound Professional is not responsible for any malfunction of the

B100S and/or the internet connection due to communication errors

or malfunctions associated with your broadband internet connection

or other connected equipment. Contact your Internet Service Provider

(ISP) for assistance or the service bureau of your other equipment.

• Contact your ISP for policies, charges, content restrictions, service

limitations, bandwidth, repair and other related issues pertinent to

internet connectivity.

USB

• Connect to this USB port USB mass storage devices formatted as

FAT32, NTFS or Linux ext4. The connected USB device appears

as a Local Source (USB) in the BluOS App.

• Access and playback music stored in the connected USB device

by selecting "USB" from the BluOS App

3 COAX OUT/OPTICAL OUT

• Connect optical or coaxial digital audio output ports to

corresponding digital input of a receiver, amplifier, preamplifier,

computer soundcard or other digital processors.

• Audio from selected source (analog or BluOS) will output through

Coaxial or Optical OUT.