Asko T760 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Suszarka Asko T760. Asko T760 2 stron. User manual use & care guide t760-t780 (use & care guide - en, fr)
Również dla Asko T760: Instrukcja obsługi i konserwacji (16 strony), Instalacja (1 strony)

Drukuj stronę

QUICK START PROCEDURES

Press the Power button to turn on the machine.

Load the dryer.

Check the lint filter. Clean it, if needed.

Check that the door is clear of laundry then close it firmly. (The door won't shut if it's slammed.)

Press the button for the desired program (P1–P4).

Press Start. The machine will start.

UNDERSTANDING THE LED WINDOW

The LED window is easy to read and understand. The illustration below explains what each item on the LED window is.

Program

When you press the Power button,

the display toggles between the

program numbers and the wash

program names, (e.g., Extra Dry,

Dry, etc.)

Preset Programs

Displays the program that

is selected/running.

The LED window also displays the menus and options available when you customize the preset programs. Refer to your Use and Care

Guide for more details.

CLEANING THE LINT FILTER

Although the lint in your ASKO dryer will be minimal, the lint filter should be cleaned after each load

to ensure maximum air flow and prevent possible overheating. To clean the filter, follow the steps

below:

1. Grasp the handle and pull it toward you.

2. Remove the filter from the holder by pulling it up.

3. Open the filter and gently brush away any lint.

4. Fold the filter together and return it to the holder on the door.

5. Push the holder in until it snaps into place.

NOTE:

We recommend that you clean the lint filter after every load.

EMPTYING THE CONDENSATION WATER CONTAINER

If Model T780 is not installed to pump out the condensed water into a drain or a sink, you should empty the

water container every three to five dryer loads, depending on the spin speed you use when you wash the

clothes. For example, clothes spun at 800 rpm will have more moisture when you take them out of the

washer than clothes spun at 1400 rpm. Therefore, the dryer will have to remove more water.

To empty the container, simply pull it out and pour out the water. This water is clean and can be used to

water plants.

If the container becomes too full, the machine with shut down. To restart the program, empty the container

and press Start. It may be a few minutes before the machine starts because it drains the excess water

from the sump before it restarts.

OVERHEATING PROTECTION

The dryer has a protection device that shuts the machine off if the temperature becomes too high. Overheating could occur if the lint filter is

clogged or if the fan or condenser unit (Model T780) needs to be cleaned. If the dryer shuts off during a program on Model T780, first, make

sure the condensation water container is empty. If that isn't the problem, check the lint filter. Lastly, it could be the fan or condenser unit needs

to be cleaned. See your Use and Care Guide for instructions on how to clean these items.

Extra Dry

Dry

Normal Dry

Iron Dry

P2 P3 P4

Start

Indicates that you pressed Start

and the program is running.

NOTE:

Do not remove the water container while the machine is running.

Program Time

Time

When you start a program, the total time the

2 3

program runs is displayed. As the program

progresses, the time remaining displays. The

program time toggles between minutes (e.g.,

23) and hours (e.g., 1h).

Stop

Indicates that the program has ended

or that you pressed Stop.

T760/T780

(T780 only)

Simply pull out the container

and pour out the water.