Asko TD77 Instrukcje użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Suszarka Asko TD77. Asko TD77 16 stron. Tumble dryers

Thermostats

There are four thermostats : The first is of 47°C and the second of 60°C, (for

automatic programs) are fitted to the fan casing.

The third of 115°C (resets automatically) operates at 115°C switching out

one of the heaters if the temperature rises excessively. The fourth thermo-

stat, also fitted to the heater casing, operates at 150°C and provides protec-

tion against dangerous overheating. It must be manually reset.

The manual overheating protection breaks the contact to the starter relay,

which means that the machine stops completely when there is overheating.

Signal lamp

The signal lamp indicates that the main switch is "on".

Driving motor

The driving motor is a bi-polar unit with direct-coupling fan and gear facility

for driving the drum.

Capacitor

The capacitor is 8 uF mounted on the component bridge.

Heating element

The heating element with 1900 + 950 W output is the spiral type, located

behind the drum.

Contactor and starter relay

The contactor and starter relay are located on the component bridge. The starter

relay breaks contact when there is overheating and when the door is opened.

Door contact

The door contact is actuated by the door, and breaks the operating circuit.

Buzzer

The buzzer is installed in the program unit and gives two signals at end of pro-

gram.

Internal cables

Internal cables are 0,75 or 1,5 mm

and 1,0 mm

for earth wire.

Connecting cables

The connecting cables shall be RKK or 5x1,5mm

Wiring diagrams

Wiring diagrams with timer diagrams and cable layout are incorporated in the

machines.

TD 70