Ambient NanoLockit Samouczek - Strona 2

Przeglądaj online lub pobierz pdf Samouczek dla Sprzęt nagrywający Ambient NanoLockit. Ambient NanoLockit 5 stron. Timecode + logging
Również dla Ambient NanoLockit: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (20 strony), Skrócona instrukcja obsługi (5 strony), Podręcznik (4 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (19 strony)

In this tutorial, we will show you how to timecode sync a DSLR-Camera

like the Sony Alpha 7s to an Ambient NanoLockit.

We will use the following gear: a Sony

Alpha 7s and an audio recorder.

To timecode sync this setup, you will

need two NanoLockits and these two

TC-IO-35RA timecode cables, which are

included when buying a NanoLockit.

Start the NanoLockits by pressing and

holding the power button for three sec-

onds.

The LED will flash green / red, which

means the LEMO timecode output is still

muted.

Press and hold the green button of one

NanoLockit for three seconds until LED

double-blinks green: This sets the time-

code and frame rate, wirelessly syncs all

other NanoLockits and activates all LEMO

outputs.

The NanoLockit always starts with its Real

Time Clock at last frame rate or at default

25 fps.

If successful, all units will flash green in

sync. Which means: they are ready to

sync other devices.