Ambient Weather TESA WS710 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stacja pogodowa Ambient Weather TESA WS710. Ambient Weather TESA WS710 14 stron. Wireless indoor/outdoor 8-channel thermo-hygrometer with daily min/max display
Drukuj stronę1. Electro-Magnetic Interference (EMI). Keep the console several
feet away from computer monitors and TVs.
2. Radio Frequency Interference (RFI). If you have other 433
MHz devices and communication is intermittent, try turning off
these other devices for troubleshooting purposes. You may
need to relocate the transmitters or receivers to avoid
intermittent communication.
3. Line of Sight Rating. This device is rated at 100 meters line of
sight (no interference, barriers or walls) but typically you will get
30 meters maximum under most real-world installations, which
include passing through barriers or walls.
4. Metal Barriers. Radio frequency will not pass through metal
barriers such as aluminum siding. If you have metal siding,
align the remote and console through a window to get a clear
line of sight .
5.6 Adjustment or Calibration
Note: The calibrated value can only be adjusted on the console.
The remote sensor(s) always displays the un-calibrated or measured
value.
Note: The measured humidity range is between 10 and 99%.
Humidity cannot be accurately measured outside of this range.
The purpose of calibration is to fine tune or correct for any sensor error
associated with the devices margin of error. The measurement can be
adjusted from the console to calibrate to a known source.
Calibration is only useful if you have a known calibrated source you
can compare it against, and is optional. This section discusses
practices, procedures and sources for sensor calibration to reduce
manufacturing and degradation errors. Do not compare your readings
obtained from sources such as the internet, radio, television or
newspapers. They are in a different location and typically update once
per hour.
-10-