Ambient Weather WeatherHub2 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Stacja pogodowa Ambient Weather WeatherHub2. Ambient Weather WeatherHub2 10 stron.
Drukuj stronęNote: if there are two devices listed, choose the first one in the
list. If there are no devices listed, this will be grayed out, and is
not required.
For other non-critical settings on this page, visit
www.meteohub.de
to download the full manual. Select Save
when complete.
Figure 5
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-283-1644 FAX 480-346-3381
www.AmbientWeather.com
8
Sensor Settings
From the Menu Bar, select Sensors. Select the appropriate
sensors for your system and add any additional sensors not listed.
Entering a Name for your sensor is optional.
In general, weather stations have the following default sensor IDs:
Type
ID
Indoor
thb0
t=temperature (indoor)
h=humidity (indoor)
b=barometer
0=no specific channel number
Most weather stations have the indoor
temperature, humidity and barometer built
into the console.
Outdoor
th0
t=temperature (outdoor)
h=humidity (outdoor)
0=no specific channel number
All of the weather stations include an
outdoor temperature and humidity sensor.
The default is no channel number.
UV
uv0
uv=ultra-violet radiation
0=no specific channel number
Most weather stations do not include a UV
sensor and is optional.
Solar
sol0
sol=solar radiation
0=no specific channel number
Most weather stations do not include a
Solar Radiation sensor and is optional.
rain
rain0
rain=rain gauge
0=no specific channel number
wind
wind0
wind= anemometer
0=no specific channel number
Page 5
Description