Ambient Weather WH31P Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termometr Ambient Weather WH31P. Ambient Weather WH31P 17 stron. Wireless thermometer w/ 10' waterproof probe
Również dla Ambient Weather WH31P: Podręcznik (9 strony)
Drukuj stronę
6. Sensor Placement
To mount or hang the sensor:
•
Use a screw or nail to affix the remote sensor to the wall, as shown in Figure 5 (a) or
•
Hang the sensor using a string or zip tie, as shown in Figure 5 (b).
(a)
Note: Make sure the sensor is mounted vertically and not lying down on a flat surface. This will
insure optimum reception. Wireless signals are impacted by distance, interference (other weather
stations, wireless phones, wireless routers, TVs and computer monitors), and transmission barriers,
such as walls. In general, wireless signals will not penetrate solid metal and earth (down a hill, for
example).
The following is a table of reception loss vs. the transmission medium. Each "wall" or obstruction
decreases the transmission range by the factor shown below.
Medium
Glass (untreated)
Plastics
Wood
Brick
Concrete
Metal
7. Console *REMOVE*
The temperature will be displayed in the indoor / 8-channel section of the display, as shown in Figure
6.
Version 1.0
©Copyright 2020, Ambient LLC. All Rights Reserved.
Figure 5
RF Signal Strength Reduction
(b)
5-15%
10-15%
10-40%
10-40%
40-80%
90-100%
Page 12