Ambient Weather RC-8465 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Budzik Ambient Weather RC-8465. Ambient Weather RC-8465 12 stron. Clearview projection radio controlled alarm clock with color changing indoor temperature
Drukuj stronę5.4.1 Projector Rotation
Press the REVERSE button
degrees.
5.4.2 Adjusting Projector Focus
Adjust the focus of the projected data by rotating the focus knob on the projector.
5.5 Viewing Minimum and Maximum Records (Memory Mode)
While in normal time mode, perform the following operations to view the minimum and maximum
values since the last time they were reset.
Command
[MAX/MIN]
Displays Indoor Maximum
Temperature and the associated
date and time.
[MAX/MIN]
Displays Indoor Minimum
Temperature and the associated
date and time.
[MAX/MIN]
Exit memory mode.
5.6 Color Changing Feature
This display has two color modes for the LCD backlight.
Manual Color Preference based on your personal preference. Press MANUAL,
RAINBOW, or TUNE buttons.
Temperature Color, based on indoor temperature. Press TEMP button.
5.6.1 Manual Color Preference
1. MANUAL Button. Press MANUAL button and the backlight color will change
automatically; Press it again, and the backlight color will stop at the color you prefer.
2. RAINBOW Button. Press RAINBOW button, and the backlight will change color as
follows: white>red>orange>yellow>green>cyan>blue>purple
3. TUNE Button. Press and hold the TUNE button to fine tune the color. The backlight will
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
on the top of the clock to reverse the projected data 180
Figure 6
Mode
Press and hold [MAX/MIN] for two seconds to
reset the maximum indoor temperature to the
current value.
Press and hold [MAX/MIN] for two seconds to
reset the minimum indoor temperature to the
current value.
Figure 7
Settings
Page 8