Asko CC4840S Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Asko CC4840S. Asko CC4840S 17 stron. Cooker hood
Drukuj stronę
possible to use the dishwasher for this task).
- After a few washes, the colour of the filters may change. This does not mean they have to be replaced.
If the replacement and washing instructions are not followed, the anti-grease filters may present a fire hazard.
• The active carbon filters are used to purify the air which is released back into the room.
The filters are not washable or re-usable and must be replaced at least once every four months.
The active carbon filter saturation level depends on the frequency with which the appliance is used, the type
of cooking performed and the regularity with which the anti- grease filters are cleaned.
• Clean the cooker hood frequently, both inside and outside, using a cloth which has been dampened with
denatured alcohol or neutral, non-abrasive liquid detergents.
• The light on the cooker hood is designed for use during
cooking and not for general room illumination.
Extended use of the light reduces the average duration of the bulb.
• Replacing halogen light bulbs (Fig. 10).
To replace the halogen light bulbs B, remove the glass pane
C using a lever action on the relevant cracks. Replace the bulbs with new ones of the same type.
Caution: do not touch the light bulb with bare hands.
• Commands (Fig. 11):
Warning!
- When activating or deactivating the operations or the alarm, the motor and lights must be switched off.
- This product is supplied with an acoustic indicator (buzzer). Each time any button is pressed, this is confirmed
by an acoustic indicator.
- This function can be deactivated or activated, by simultaneously pressing the ON and TIMER buttons for
five seconds.
- If your product is a recirculating version, it is necessary to activate the active carbon filters indicator function
which you find in the paragraph regarding this function.
Button A = light (Softlight)
Starting:
A brief pressure on the light button will turn on the light at the maximum intensity, activating the fast softlight
function.
Adjustment:
By keeping the light button pressed, the intensity can be adjusted from maximum to minimum and vice-
versa.
Switching off:
Quick pressure of the light button.
Button B = OFF and Speed reduction
Adjustment:
A brief pressure of the OFF button will reduce the motor speed. For example the indication on the display goes
from speed 3 to speed 2.
speed 3
speed 2
Switching off:
If the operating speed of the motor is set on level 1 of the display, a brief pressure of the OFF button will switch
off the hood.
speed 1
- 6 -