AMC iMIX 63 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Amplificador AMC iMIX 63. AMC iMIX 63 16 páginas. Stereo mixing preamplifier
Também para AMC iMIX 63: Manual do utilizador (14 páginas)

Imprimir página
AMC iMIX 63 Manual do utilizador

Front Panel

1. INDICATION
These green LEDs indicate audio signal in
the input.
2. VOLUME COMBO XLR
These rotary knobs are for adjusting
volume level of the universal mono inputs.
First six inputs can be use as balanced line
level as well as microphone level inputs. The
phantom power can be activated for these
inputs separately in rear panel. The input
gain
selector is located in the rear panel too.
3. VOLUME STEREO RCA
These rotary knobs are for adjusting
volume level of the line level RCA inputs.
Input 7, 8 and 9 are line level, unbalanced,
stereo inputs.
4. MONITOR
This is volume control for adjusting audio
level in the balanced monitor output. In this
output can be linked audio from the combo
inputs.
5. MONITOR ON/OFF BUTTON
If this button is in the "ON" position, all
combo inputs are linked in to monitor
output. At this moment only input 7, 8 and 9
are available in the master, mono and rec.
outputs. When the button is off, all inputs
are linked in to main, mono and rec. output,
at this moment monitor output is inactive.
6. EQUALIZER
3 band: low, mid and high
Center frequency of the "LOW" tones
equalizer is 80Hz, adjusting level ±15dB. The
"MID" tones can by adjusted in ±12dB range.
Center frequency 2.5kHz. "HI" tones are ready
to be adjusted in ±15dB range. Center
frequency – 12kHz.
7. MONO
This volume control is designed to adjust
volume level in the balanced mono output. If
monitor button is "ON", in this output are
available audio from stereo RCA inputs only.
8. LED BAR INDICATOR
This is level indicator of the master output.
9. MASTER
This potentiometer is designed to adjust
audio level in the master output.
10. "POWER ON" INDICATOR
This LED indicates status of the power.
This LED indicates when preamplifier is
turned on.
11. POWER BUTTON
This button is designed to turn on/off
main power of the device.
equalizer.