AMC SR137 Manual - Página 2
Procurar online ou descarregar pdf Manual para Sensores de segurança AMC SR137. AMC SR137 4 páginas.
Imprimir página
INSTALLAZIONE
Eseguire in sequenza le seguenti operazioni :
configurare i jumper J11, J12 e LAUNCHING in funzione della modalità di attivazione della sirena;
collegare la batteria tampone da 12 V
collegare l'alimentazione esterna da 13,8 V
collegare la linea "positivo a mancare/dare" o "negativo a mancare/dare" al morsetto START
i contatti antiapertura e antistrappo sono collegati in serie e devono essere connessi al relativo
circuito della centrale di allarme attraverso i contatti TAMPER
regolare il trimmer per la temporizzazione del suono e lampeggio desiderati
chiudere il contro-coperchio in metallo con le apposite viti
chiudere la sirena con il coperchio in plastica
ENGLISH
The SR137 is a high-power back-up battery siren (105 dB at 3m) protected against tampering (opening,
tearing off a and anti-foam). It features a 10W flasher and a sound/flash timer, variable with adjustable
trimmer from 1 min. to 7 min., which trips in case of prolonged alarm (eg. connection cable cutting). It has a first
switch-on stop function to prevent the siren from tripping during installation. (for enabling the siren for normal
use it's necessary to activate/deactivate alarm start).
TECHNICAL SPECIFICATIONS
Rated power voltage:
Operating limit voltages:
Amp draw at max power:
Amp draw when not operating:
Fundamental Frequency:
Sound pressure (at Vn=12VDC):
Light power:
Sound and flash timer:
Buffer battery:
Dimensions:
Weight (with battery):
Operating temperature:
Flashing short-circuit protection fuse:
IP grade
ADJUSTMENTS AND CONNECTIONS
Trimmer TR1 : sound and flashing timer adjustment from 1' to 7' ± 20%
TAMPER terminals : contact N.C. resistant to opening and rip-off
SUPPLY terminals : 13.8 VDC power supply ( rated )
START terminal :
"positive missing"
"negative missing"
"Start with positive"
"Start with negative"
"launching"
In the "launching" mode, the "+12v" terminal must be connected to the "start" terminal (no back-up battery)
2 Ah ai fili rosso e nero con faston.
Jumper J11=
Jumper J12=
Jumper LAUNCHING =
Jumper J11=
Jumper J12=
Jumper LAUNCHING =
Jumper J11=
Jumper J12=
Jumper LAUNCHING =
Connect a 10Kohm resistor between terminal "START" and terminal "-12V"
Jumper J11=
Jumper J12=
Jumper LAUNCHING =
Connect a 10Kohm resistor between terminal "START" and terminal "+12V"
Jumper J11=
Jumper J12=
Jumper LAUNCHING =
ai morsetti SUPPLY
13.8 VDC
10 15 VDC
1.5 A
2.5 mA
1622 Hz
105 dB(A) at 3 m
10W
from 1' to 7' ± 20%
12 VDC , 2 Ah
236mm(L) x 280mm(H) x 99mm(P)
2700g
- 25 °C + 55 °C
2A
IP 54
open
female jumper on B
female jumper on OFF
closed
female jumper on A
female jumper on OFF
open
female jumper on A
female jumper on OFF
open
female jumper on B
female jumper on OFF
open
female jumper on A
female jumper on ON