AMCOL 6000E Manual do operador - Página 2

Procurar online ou descarregar pdf Manual do operador para Controlador AMCOL 6000E. AMCOL 6000E 6 páginas. Electronic timing controller for forming and fabricating
Também para AMCOL 6000E: Manual do operador (19 páginas)

Imprimir página
AMCOL 6000E Manual do operador
What is Electronic Control of Injection Pulse Rate?
Figure 1
In many situations, the electronic control of pulse rate comes from the machine PLC.
Programming a PLC and installing additional hard wiring for the two-solenoid configuration is
not always easy. AMCOL has created a quick simple solution to convert your one electric air
solenoid output to a two-valve output.
The 6000-ETC-FF Electronic Timing Controller for Forming and
Fabricating
The 6000-ETC-FF is a self-contained PLC that is preprogrammed to interface with your machine
to convert your one-solenoid valve output to be two-solenoid valve output.
The first output will control
the Dispersing Air Solenoid
Valve (SV1) and it will be on
during the complete spray
cycle that is determined by
the number of injections
and cycle time. The second
output will control Injection
Pulse Rate Solenoid Valve
(SV2) during the spray cycle
where the cycle rate will
equal T2. (See figure 2)
The 6000-ETC-FF gives you the ability to change the number of injections and the pump cycle
time quickly and accurately after the desired number of inputs at the push of a button.
ELECTRONIC TIMING CONTROLLER FOR FORMING AND FABRICATING 6000E SYSTEMS TD-OM
A Quick Solution to Upgrade to Electronic Pulse
Rate Control
The AMCOL 6000E Precision Applicator is equipped with a two-solenoid
valve configuration where Dispersing Air Pressure is controlled separately
from the Injection Pulse Rate (system shown in Figure 1). This configuration
is an alternative to the better-known single solenoid valve systems where
injection rate is controlled with an integral air timer (also known as a Pulse
Frequency Generator).
The concept and option for electronic control of injection rate is not new
and is quickly gaining popularity. By replacing the air operated timer with
electronic control of injection rate, the result is precise, repeatable, and
adjustable lubricant output volumes.
Figure 2
File ID: 6000-ETC-FF
Approved for Use
LSB: AA-0014
LSD: 10/24/2022
FDR: PS04
P A G E | 2