Floe Cargo Max 650-70006-01 Manual de instruções de montagem - Página 3

Procurar online ou descarregar pdf Manual de instruções de montagem para Veículo utilitário Floe Cargo Max 650-70006-01. Floe Cargo Max 650-70006-01 12 páginas.

Imprimir página





Cargo Max assembly - Step 1









    

























AsseMBling THe Axles & Tires - PArT one









1. Locate the axle isolation strips packed in the assembly

components kit.

2. Place an isolation strip on the two inside surfaces of the axle

mount as shown in FIG. 1A.

TiP: Tape will aid in holding the strips in place.

3. Place the trailer frame on the axle mounts, aligning the holes

in the axle mount with the front two holes in the frame. Note

the orientation of the torsion arms in FIG. 1B.

4. Next, insert (2) 1/2-13 x 3-1/4" bolts through the bottom

holes on the fender support brackets as shown in FIG. 1B.

5. Fasten with (2) flat washers and (2) nylock nuts. Make sure

that the axle mount, teflon strip, and axle beam are tight





together with no gap before tightening.

Torque to 80 FT/lBs.