FLOJET 4105 Series Manual - Página 2

Procurar online ou descarregar pdf Manual para Bomba de água FLOJET 4105 Series. FLOJET 4105 Series 4 páginas. Shower drain/r.o. feeder pump

INSTALLATION

STEP I

Remove shipping plugs from Quad pump ports. Some

water from factory testing may spill out

STEP 2

Install inlet A and discharge, B port connectors. Firmly

push slide clips C forward to lock port connectors in

place.

STEP 3

Slide rubber mounts fully into 4 mounting tracks.

STEP 4

Mount pump vertically, with pump head down or

horizontally in an ible location. If mounting vertically,

WIRING

STEP I

Use 14 gauge stranded wire to 20', 12 gauge to 50',

from power source.

STEP 2

Use a 10-15 amp rated (lighted) on-off switch on the (+)

positive (red) motor lead.

motor up, attach motor mounts first then pump head

mounts, while supporting weight of pump.

STEP 5

Use 1/2" I.D. flexible hose (preferably braided or

reinforced). Use hose clamps on the slip-on barb hose

connectors.

STEP 6

Install a 1/2" in line strainer #01740-002 in accessible

location between shower drain pan and pump inlet. This

strainer or equivalent is required for pump warranty to be

valid.

STEP 3

Install 10 amp fuse protection on the positive lead for the

-143 model, use a 7 amp fuse for the -343 model.