Amcrest AF-2MBC-6W Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Amcrest AF-2MBC-6W. Amcrest AF-2MBC-6W 9 páginas.

6. Operation and Maintenance

Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber

cloth.

7. Accessories

Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the

package and check to make sure that all the components are present. Contact the retailer that you purchased from

or Amcrest directly if anything is broken or missing in the package.

Product Introduction

This series of camera is adopted with CMOS image sensors that provide high performance, high megapixel

resolution that supports HD video. It supports monitoring signals via a coaxial transmission and standard BNC

connection. Transmission distances can range more than 300m (984.25ft) based on 75-3 coaxial cable. This series

can also support CVI/TVI/AHD/Analog output as well as recognize high speed, long distance, and real time video

transmissions.

•

1/2.9" 2MP Sony EXmor CMOS

•

AGC, AWB, AES

•

2D DNR, D-WDR, Smart IR Control

•

Multi-Languages OSD Control from Recorder

•

HD-CVI/HD-TVI/AHD/CVBS Output Selectable from Toggle Switch

•

DC12V, 2.0A

1) Locate the position in which you would like to place your camera and apply the included mounting sticker to the

surface.

2) Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors,

drill out the smaller circles on the sticker and insert the anchors into the holes.

Note: The wall anchors should be in the same bag as the screws and a designed to secure the screws onto the

mounting surface.

3) Attach the power and desired video cabling.