Flomec QS200 Manual do proprietário do produto - Página 5
Procurar online ou descarregar pdf Manual do proprietário do produto para Instrumentos de medição Flomec QS200. Flomec QS200 20 páginas. Insertion ultrasonic flowmeter options for large pipe sizes
Também para Flomec QS200: Manual de instalação (8 páginas), Manual do proprietário do produto (16 páginas)
Imprimir página
GENERAL SAFETY INSTRUCTIONS
IMPORTANT: It is your responsibility to:
Ensure that all equipment operators have access to adequate instructions
•
concerning safe operating and maintenance procedures.
NOTE: Be sure O-rings and seals are kept in good repair.
This product is not approved for use with petroleum
(diesel fuel, unleaded gasoline, jet fuel, kerosene, etc.), aromatic
hydrocarbons or other incompatible chemicals.
This product is not approved for use in hazardous locations.
When applying power, adhere to specifications listed in
appropriate electronics manual.
Disconnect external power before attaching or detaching input or
output wires.
Compatibility of this product's material and the process fluid
and/or environment should be considered prior to putting into
service.
Product should never be operated outside its published
specifications for temperature or pressure. See specifications for
your model.
Make sure flow and pressure have been eliminated from process
pipe prior to installing or removing product.
Installation near high electromagnetic fields and high current
fields is not recommended and may result in inaccurate readings.
Do not allow water to freeze in meter. Ice expansion may burst the
plastic housing.
Do not allow this meter to be used with steam.
Thermal expansion/contraction of plastic pipe can cause clamps to
loosen. Make sure clamps are ALWAYS tight (Recommended
Torque is 75 IN
L B).
·
5
products