AME Fasy-Flate 24868 Manual - Página 7
Procurar online ou descarregar pdf Manual para Ferramenta eléctrica AME Fasy-Flate 24868. AME Fasy-Flate 24868 12 páginas. Digital automatic tire inflator (portable)
Imprimir página5. Inflation and Deflation
1. Press (P1) or (P2) to select default preset
pressure.
2. Press (+) or (-) to adjust target pressure.
3. Connect with tire, ensure no air leaks,
inflator will start automatically.
4. When inflation is finished, the device will
stop automatically and BEEP to remind
the user.
5. Disconnect the air hose from tire.
6. Power on/Power off/Backlight
When battery indicator is flashing on the
LCD screen please recharge the battery.
Press (ON/OFF/LIGHT) two seconds to
turn on,
Press (ON/OFF/LIGHT) to turn on backlight
when the device is on,
Press (ON/OFF/LIGHT) for three seconds
to turn off.
Notes:
1. Press (SET) to enter the (OPS) setting.
2. Press (SET) four times and the device
will exit out of the setting mode without
saving any selection.
3. When OPS function is selected the
device will inflate to target pressure plus
the OPS value first, then deflate to tire
pressure desired, for example: A final
target of 32 p.s.i. with an OPS setting of
16 p.s.i. gives a sum of 48 p.s.i. This
sum of 48 p.s.i. is the Over Pressure
Setting for tire. The tire will inflate to the
sum value and deflate to the final target
pressure.
Instruction Manual
4. During inflation, the device will check
tire pressure automatically, the working
indicator will be on, left to right means
inflating, right to left means deflating.
WARNING
To avoid the risk of
personal injury, especially
to the eyes, face or skin.
DO NOT direct the air
stream at any person
WARNING
This equipment is not
intended for use by
children without adult
supervision
WARNING
When using the OPS
function the sum pressure
must not exceed the tire
manufacturer's maximum
inflation pressure.
7