AME Combi 11020 Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial AME Combi 11020. AME Combi 11020 7 páginas. Modified tire bead breaker
Imprimir página
Continuing to Break the Tire Bead
1. Turn the tire over on the other side.
2. Repeat all steps, starting with "Positioning the Tire Bead"
on page 2.
MOUNTING AND INFLATION
Jacking Up the Vehicle
1. Chock the wheels opposite the jack.
2. Jack up the vehicle.
3. Crib the vehicle with safety stands or blocking devices after jacking it up. Do not work under an un-
blocked load.
DANGER
Failure to chock the wheels and crib the vehicle can result in serious injury or death.
Inspecting the Tire and Rim
DANGER
Always replace damaged or badly worn tires. When replacing tires, always use a replacement of
exactly the same diameter. Destroy old tires, so that they cannot be used. Using badly worn or
damaged tires can result in serious injury or death.
1. Inspect all rim parts for damage.
DANGER
Always replace rim parts that are bent, badly rusted, pitted from corrosion, cracked, worn, or dam-
aged. Destroy old rim parts, so they cannot be used. Using damaged rim parts can result in serious
injury or death. Do not mix parts from one rim with parts from another rim. Always use replacement
parts that you can positively identify as the CORRECT replacement parts. All replacement rim parts
MUST match the replacement part numbers stamped on the rim parts. Rims with different part num-
bers cannot be interchanged. If in doubt about sizing, DO NOT reassemble the rim. Contact the rim
manufacturer for more information.
2. Replace damaged parts.
DANGER
Never weld on an inflated or partially inflated tire/rim assembly. Welding on an inflated tire/rim as-
sembly can cause an explosion and serious injury or death. Do not rework, weld, heat, or braze any
rim parts for any reason. Reworking and welding damaged parts can result in serious injury or
death.
AME INTERNATIONAL
INSTRUCTION MANUAL
- 5 -