Coalesse E-table 2 Manual - Página 4

Procurar online ou descarregar pdf Manual para Mobiliário de interior Coalesse E-table 2. Coalesse E-table 2 15 páginas.

1. DETERMINE FINAL LOCATION OF THE TABLE

The table base can be placed directly over a flush-floor monument no larger than 6 3/4" diameter (shown),

or adjacent to either a flush floor or above floor monument.

2. LOCATE AND INSTALL THE POWER INFEED

(Note: A licensed electrician can install the power infeed before, during, or after the table assembly

process.)

There are three power infeed options available: 3-circuit hardwire (2a), single-circuit plug (2b), or 3-circuit

hardwire-New York version (2c). Remove the infeed from the beam assembly box.

Hardwire power infeeds must be installed by a licensed electrician in accordance with all local codes.

See the Note on page 2 of these instructions and the wiring schematic on page 3.

Page 4 of 15

939500448 Rev E