Aktacom ASE-1111 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Pistola de soldar Aktacom ASE-1111. Aktacom ASE-1111 7 páginas.

General Notes

Soldering is a process in which two pieces of metal are joined

with a molten solder. Metals which can be soldered are, among

others, copper, brass, iron etc. Further, soft soldering and hard

soldering (brazing) are distinguished.

Hard Soldering takes place at temperatures of over 450 °C. This

soldering station is for soft soldering.

First Steps

• Take the unit out of the package and dispose of the

packaging materials (plastic bags) or store out of the reach

of children. There is a danger of suffocation!

• Place the soldering station on a solid, level surface.

• Place the stand for the soldering iron to the right of the

soldering station.

• Now place the soldering iron in the stand and plug its cable

into the socket on the soldering station. Make sure the

notch in the plug faces up when you plug it in. Tighten the

retaining ring by turning clockwise.

• Before use make sure the mains voltage in your area

corresponds to the operating voltage stated on the type

label (230 V~ 50 Hz). Plug the unit into a protected socket.

Do not use the soldering iron without a soldering tip, this

might damage the heating element and the temperature

sensor.

• Before the first use the soldering tip must be tinned. To do

so, allow some solder to melt on the tip and let it flow

around the tip until an even film has formed around the

entire tip.

• Integrated in the stand for the soldering iron is a drawer

with a cleaning sponge, which you should make wet before

use.