Aktakom ATK-2001 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Aktakom ATK-2001. Aktakom ATK-2001 11 páginas. Clamp meter

for the DC current measurement. The Zero/Relatiive function will be disabled if the

MAX/MIN button is enabled.

7. LCD

This is a 3 3/4 digit Liquid Crystal Display with maximum indication of 3999.

Function symbols, units, bargraph, sign, decimal points, low battery symbols,

max/min symbols, and zero symbol are included.

8. Low Battery Symbol

When this symbol appears, it means the battery voltage drops below the minimum

required voltage. Refer to Section V for battery replacement.

9. Zero/Relative Symbol

When this symbol appears, it means a reference value has been subtracted from

the actual reading. The reading shown is a offseted value. Press the zero button

again to disable this function.

10. Data Hold Symbol

Once the hold button is pressed, this symbol appears on LCD.

11. Bargraph

Bargraph has forty segments. It displays segments proportional to the actual

reading. Each segment represent one count.

12. Max/Min Hold Symbol

Once the max/min button is pressed, either MAX or MIN shall be displayed on LCD.

14. Units Symbols

Once a function is selected, corresponding unit (V, mA or A) shall be displayed on

LCD.

15. V Input Terminal

This terminal is used as input for voltage measurements.

16. COM Terminal

This terminal is used as common reference input.

17. Hand Strap

Put your hand through the hole of hand strap to avoid accidental drop of the clamp

meter.