Acer AL1922 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Monitor Acer AL1922. Acer AL1922 20 páginas. 48cm(19”) tft color lcd monitor

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the

VESA DDC STANDARD. It allows the monitor to inform the host system of its

identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bidirectional data channel based on the I

C protocol.

The host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS

NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE

PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video

Electronics Standards Association (VESA) and/or the United States

Environmental Protection Agency (EPA) and The Swedish Confederation

Employees (NUTEK). This feature is designed to conserve electrical energy

by reducing power consumption when there is no video-input signal present.

When there is no video input signal this monitor, following a time-out period,

will automatically switch to an OFF mode. This reduces the monitor's internal

power supply consumption. After the video input signal is restored, full power

is restored and the display is automatically redrawn. The appearance is similar

to a "Screen Saver" feature except the display is completely off. The display is

restored by pressing a key on the keyboard, or clicking the mouse.

USING THE RIGHT POWER CORD :

The accessory power cord for the Northern American region is the wallet plug

with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for

the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal

computer: Please use a cord set consisting of a minimum No. 18 AWG, type

SJT or SVT three conductors flexible cord. One end terminates with a

grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration.

The other end terminates with a molded-on type connector body, rated 10A,

250V, having standard CEE-22 female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821

approval power cord in European counties.