Aero-Spa Aero-pool Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Banheira de hidromassagem Aero-Spa Aero-pool. Aero-Spa Aero-pool 13 páginas.

For best results it is highly recommended that the pool be

thoroughly cleaned to remove residual dirt and contaminants

prior to installation of the Aero-Pool system.

Set the equipment on a level solid spacer block that is at least 2

– 3/8" thick and at least 10' from the pool that is not prone to

flooding (equipment is weather proof but not waterproof) Figure

2. If the supplied ozone tube is not of adequate length, move

the equipment closer to the pool but not closer than 10'. Do not

extend or shorten the ozone tube. If the tube is too long, coil

the excess tube in an 8" diameter coil.

Note: an improperly sized ozone tube will detrimentally affect the

performance and life of this product and may void the warranty!

Spacer

Block

Equipment Set-up

Resting Surface

Figure 2: Unit Placement

2 3/8 in.

Minimum