Acer B247Y Manual - Página 31

Procurar online ou descarregar pdf Manual para Monitor Acer B247Y. Acer B247Y 37 páginas. 24" lcd monitor. lifecycle extension
Também para Acer B247Y: Manual do utilizador (29 páginas), Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual do utilizador (37 páginas), Manual do utilizador (40 páginas), Manual de início rápido (2 páginas)

1. If it appears all "00" when read the EDID data, you need reconnect the ISP tool or install the the driver of the ISP tool

again.

Note: While reading the DP EDID data, you must light up the monitor or connect a signal to the monitor. If after doing

this setp the EDID still shows all "00", but others port can show the EDID data, the EDID data of DP uaually

include in FW,can't read out it.

2. If it appears all "FF", it shows that the EDID data of the Main board is empty, you must writing the EDID again.

6. Troubleshooting.

6.1. Can't write!

(1) AC on the monitor and turn on it.(Restart the monitor)

(2)Take apart the monitor and connect the 7pin of EEPROM to GND to diable write protection then write EDID one

by one.

(3) Set the Burn in on last to try again.