Aerobics AERO CURE ONE Series Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Filtro de ar Aerobics AERO CURE ONE Series. Aerobics AERO CURE ONE Series 11 páginas.

INSTALLATION

The choice of location for your Aero Cure One™ unit is a key factor to its performance. You

should place the unit in the room in which you want to focus you air treatment strategy.

Additionally, the unit should be placed as close as possible to any obvious sources of room air

contamination. Additional tips:

• Place the unit so that it is not obstructed by furniture or other items

• Place the power cord so that is not a tripping hazard

• Place the unit as close to the center of the room as practical

• Place the unit away from areas where it is likely to get wet, or objects can be

inadvertently placed on top of it.

The unit plugs into a standard 120 volt AC grounded receptacle.

Never attempt to plug the unit into an ungrounded receptacle. This could result in electric

shock, injury or death.

The Aero Cure One™ unit is designed to have the simplest possible operation.

The ON/OFF switch is located on the right side of the unit. The unit has been engineered to

operate at one predetermined speed for maximal efficiency of air disinfection. Below the power

switch is an indicator light which indicates that the ultraviolet lamps are working properly. If

this indicator light fails to illuminate, but the fan of the unit is running, this indicates that the

UV lamps need to be replaced. Contact customer service for authorized replacement lamps. To

the right of the switch you will see the filter life display screen. When the unit is powered on

the screen will illuminate and show the current filter life, starting with one hundred percent

and counting down to zero. When filter life hits zero the display will flash the message replace

filter, until the filter reset button has been pressed.