Aerobits TR-1F Manual - Página 5

Procurar online ou descarregar pdf Manual para Transcetor Aerobits TR-1F. Aerobits TR-1F 7 páginas. 0.25/0.5/1 watt ads­b and flarm transceiver

Imprimir página
TR­1F
ADS­B In/Out
www.aerobits.pl
Figure 3: Port select window
3. Press "Settings" to enter the parameterization mode of the module. After setting the parameters, press the "Ok" button to
save the settings. TR­1F is ready to work.
Figure 4: Settings window

GENERAL INFORMATION

1. Module installation – There is a high concentration of various electronic systems on a small area at UAS. Try to keep as much
separation between TR­1F and other devices, especially radio ones. Despite the high robustness of TR­1F to jamming, try to
install the antenna away from other on­board systems.
2. AERO vs. MAVLink protocol – TR  1 F is based on OEM TT  S F1a module. The default is in AERO protocol mode, which
is an ASCII protocol. If you want to use the module to work with MAVLink system, it is possible to switch the protocol to
MAVLink, which has the binary representation. Details of the module programming can be found on the website.
Revision: 09­March­20
5
Document Number: 090320
This document is subject to change without notice. For technical questions, contact: