Air Black Ridge BR180D Manual - Página 10
Procurar online ou descarregar pdf Manual para Compressor de ar Air Black Ridge BR180D. Air Black Ridge BR180D 20 páginas.
Imprimir página
OPERATING INSTRUCTIONS
Unpacking
Carefully unpack your air compressor. This air compressor is
bulky and heavy, two (2) person lift required. Dispose of all
packing material in an environmentally responsible manner.
Assembly
Your air compressor requires minor assembly before initial
operation. Check that you have all components required for
assembly and initial use.
Your compressor is filled with oil do not tip to assemble.
Oil Breather:
To fit the oil breather:
1. Remove the transport plug and throw away,
see Pic. 2.
2. Screw in the oil breather, see Pic. 2.
Lubrication:
Your air compressor IS FILLED with OIL!
Warning:
To check the oil level:
1. Always check the oil level when the air compressor is on
flat and level ground.
2. To confirm the oil level lift the back, wheel end, up
about 20cm, hold for about 1 minute and place back on
ground.
Look at the sight glass and ensure the oil is above the red dot
on the sight glass, as per the "OIL LEVEL GAUGE" label, see Pic.
3 and Pic. 4.
To add oil, if required, additional oil not included:
1. Remove oil breather.
2. Add oil, SAE30 to at least the top of the red dot,
see Pic. 4.
3. Oil level will take about 1 minute to drain down and
settle.
4. Check oil level in sight glass, see Pic. 3. Re-check and
top up if required, until level is correct.
WARNING
Do not attempt to operate this compressor until it is fully
assembled.
Damage caused due to incomplete assembly will not be
covered under warranty.
Ensure the air compressor is disconnected from
the power supply before carrying out any assembly,
maintenance or adjustments on the machine.
Never under fill or over fill with oil.
PIC. 2
Screw in oil
breather
Remove
and discard
transport plug
PIC. 3
Oil level should be to
the top of the red dot
on the sight glass
as per the label
PIC. 4
10