12-Voltair 12V6CF Manual do Proprietário - Página 14

Procurar online ou descarregar pdf Manual do Proprietário para Compressor de ar 12-Voltair 12V6CF. 12-Voltair 12V6CF 16 páginas. 150 psi 6 cfm

TROU BLESHOOTINg

mY 12-VOLTAIR SHAkeS A LOT.

1. Check to make sure there is adequate belt tension. You should have anywhere from 1/4" - 3/8" movement

when applying 50% pressure to the belt directly between the motor and pump pulleys

2. Check to make sure that the motor and compressor are securely fastened to the frame. Make sure that bolts

have not come loose.

mY 12-VOLTAIR RUnS BUT IS nOT ABLe TO PUmP UP AnY PReSSURe

1. Check to see if you have any external air leaks

- Disconnect any air storage tanks and plug tank supply line and run compressor to see if pressure

builds up

- If this fixes the problem you have a leak that needs to be fixed

mY 12-VOLTAIR jUST STARTS - STOPS - STARTS - STOPS

1. You probably don't have an external air storage supply tank. The compressor is shutting down with 150

PSI in the air lines and a small leak is draining the pressure down to 125 PSI and the compressor is

kicking back on to build the pressure back up to 150 PSI.

mY COmPReSSOR RUnS FAST AT BeGInnInG BUT SOUndS LIke IT SLOWS dOWn AFTeR IT HAS RUn FOR 5,

10, 15 mInUTeS.

BATTERY

STEP 1 Recharge battery to make sure you have a good full charge if the problem still exists- STEP 2

STEP 2 Replace battery with a new battery. See battery facts on page 8 - if this does not

fix that problem- STEP 3

STEP 3 Check your alternator.

OPTION 1- Take it to a mechanic for him to check

OPTION 2- With an DC amp meter and the vehicle running, check the wire between the battery

and the alternator to see if the alternator is charging

WHen RUnnInG THe 12-VOLTAIR FOR exTended PeRIOdS OF TIme, mY VeHICLe jUST SHUTS OFF

BATTERY- check the steps above to diagnose a problem

HOW dO I AdjUST mY PReSSURe SWITCH

"A ir W here A nd Wh e n Yo u N e e d I t ! "

Page 1