123inkt G100 Manual - Página 4

Procurar online ou descarregar pdf Manual para Altifalantes 123inkt G100. 123inkt G100 5 páginas.

After pairing, the blue bluetooth/TWS light turns on for the left channel (master speaker). The red

bluetooth/TWS light turns on for the right channel (slave speaker).

When the devices are connected to TWS, the speaker will prompt: "TWS paired".

Enable the bluetooth function of your mobile/other devices and connect to the 123ink G100 speaker.

When connected, the speaker will prompt: "device paired". The blue bluetooth/TWS indicator turns on.

The two speakers can now play music simultaneously.

Disconnect the two paired speakers by pressing the button on one of the two G100's twice. The

speaker will prompt, "TWS disconnected."

The speaker will prompt, "TWS removed" when you long press the button on one of the speakers

Please note:

1. To use this feature, you need two 123inkt G100 bluetooth speakers.

2. The bluetooth/TWS indicators flash blue before pairing with TWS. This happens when both

speakers have not been previously connected to a Bluetooth device.

3. If the two speakers were previously paired with a third G100 speaker, you must clear the pairing

memory first. Otherwise, the speakers cannot pair with each other. Long press the

both speakers to clear the TWS pairing memory.

Playing music from a USB stick

Insert the USB flash drive into the speaker. Briefly press the button to enter USB mode. The speaker will

immediately play the music from the USB stick. The speaker will prompt: "PC USB mode".

3.1

Ambient light

Press twice: turn ambient light on/off

3.2

Switch to another folder on the USB drive

Press twice: switch to the next folder on the USB drive

Press twice: switch back to the previous folder on the USB drive

3.3

Switch songs

Short press: switch to the next song

Short press: switch back to the previous song

AUX-in mode

Use the included 3.5mm audio cable to connect the speaker to an audio source such as a PC, cell phone,

MP3/MP4.

Short press: Activate AUX-in mode. The speaker will prompt: "AUX-in mode." The speaker then plays the

music from the audio source.

Please note:

When you connect the speaker to your PC via the AUX-in cable to play music, you can charge the speaker

at the same time. If your computer's power supply is weak, we recommend using an adapter (5V 2A) instead

of your computer's USB port for playing music and simultaneously charging the speaker.

button on