BOBPERRY AUDIO Ducker 2 Manual - Página 3

Procurar online ou descarregar pdf Manual para Leitor multimédia BOBPERRY AUDIO Ducker 2. BOBPERRY AUDIO Ducker 2 13 páginas.

Bob Perry Ducker 2 – Manual – Page 3/12

User Interface

The user interface mainly consists of dials and buttons. The numeric values under the dials

can be clicked to enter a numeric value. Some dials feature context menus accessible via

right-click. See below.

THRESHOLD

Serves for the adjustment of the threshold. If the level of the side chain exceeds the

threshold, the ducking process will be triggered. A threshold below the side chain signal's

amplitude should be chosen, otherwise Ducker 2 won't alter your signal.

ThresPass LED: The white ring on the Threshold dial lights up whenever the gain of the signal

in the Aux chain surpasses the Threshold.

While setting the Threshold, the AUX waveform (white) will be displayed in front of the other

waveforms in the waveform display. Additionally, the Threshold Line will appear to visualise

the Threshold in relation to your signal.

REDUCTION

Sets the gain reduction in dB. For subtle effects we recommend using a range of up to

±3dB. For pumping club / house music sound go down to -10dB.

Use boost for special effects – it's all up to your creativity.

CURVE

The CURVE switch lets you choose between linear (LIN), logarithmic (LOG) and S-CURVE

volume curves for attack and release of the ducking process. The decision which one to take

will solely be based on your signal and personal taste.

VST is a software and trademark of Steinberg Media Technologies GmbH.

20210113160815