Euro-Pro Shark EP600C Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Aspirador de pó Euro-Pro Shark EP600C. Euro-Pro Shark EP600C 10 páginas. Turbo stick vac
Imprimir página
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR-
BÂTON TURBO SHARK
Spécifications techniques
Tension :
120 V, 60 Hz
Puissance :
7,5 Amp, 900 watts
*Les illustrations peuvent différer du produit lui-même.
11
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Power cord not firmly plugged into
outlet.
VACUUM WILL
2.
No power in wall outlet.
NOT OPERATE
3.
Needs servicing.
4.
Thermostat has tripped.
1.
Dust cup is full.
VACUUM WILL
2.
Unit clogged.
NOT PICK-UP OR
3.
HEPA-Type Filter needs cleaning
SUCTION POWER
or replacing.
IS WEAK
4.
Debris screen needs cleaning.
DUST ESCAPING
1.
Dust cup is full.
FROM VACUUM
2.
Dust Cup is not installed correctly.
VACUUM, HOSE
1.
Hose clogged.
OR BRUSHES
2.
Dust cup is full.
WILL NOT PICK-UP
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT HEPA-TYPE FILTERS
Item # XSH600
for Models EP600C, EP600F
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
visit our website: www.sharkvac.com
FOR TECHNICAL SUPPORT
for Models EP600C, EP600F
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA-TYPE Filter is washable. It should, however, be replaced every three (3)
months to ensure peak performance of your vacuum.
Both the Pre-Motor and Post Motor Filters are washable. They should however be
replaced every three (3) months to ensure peak performance of your vacuum.
Important:
Make sure that ALL filters have been completely air dried for 24 hours before re-
installing back in the vacuum.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2.
Check fuse or breaker. Replace
fuse/reset breaker.
3.
Call 1-800-798-7398.
4.
Turn the unit off and unplug from
outlet. Allow unit to cool down,
then restart.
1.
Empty and clean dust cup.
2.
Turn unit off and unplug from
wall outlet. Remove Dust Cup
Filter and check for object(s) in
air duct and remove.
3.
Clean or replace HEPA-Type
Filter.
4.
Clean debris screen.
1.
Empty and clean dust cup.
2.
Review Dust Cup instructions.
1.
Remove hose and/or brushes.
Remove obstruction from hose
and /or brush.
2.
Empty and clean dust cup.
1 (800) 798-7398
or
1-800-798-7398
8