Euro-Pro SC926H Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Máquina de limpeza a vapor Euro-Pro SC926H. Euro-Pro SC926H 8 páginas. Professional stainless steel steam cleaner 120v., 60 hz, 13 a., 1550 w

Imprimir página

OPERATING INSTRUCTIONS

Care and Maintenance

If you consistently use demineralized or

distilled water, cleaning the tank is

unnecessary.

Rinsing Out the Steam Cleaner

Normally, a periodic rinse of your steam

cleaner will free it from deposits. This is

recommended every 10-15 tankfulls, to

free up any scale deposits from the tank.

Fill the boiler with 20 oz. of water and

shake the cleaner vigorously. Tilt the

cleaner upside down to empty the boiler of

water and any scale deposits.

Descaling Your Steam Cleaner

If the tap water in you area contains a high

level of calcium deposits and you have

been using tap water to do your steam

cleaning, you should descale your unit

after 10-15 tankfulls.

To Descale the Steam Cleaner

Step 1:

Unplug the steam cleaner from

the power source before you

descale the boiler. Allow to cool.

Step 2:

Fill the boiler with 1 part

vinegar and 5 parts water and

leave overnight or for a period

of approximately 8 hours. Do

not screw the safety/filler cap

onto the steam cleaner while

you are descaling the boiler.

Do not use the steam cleaner

while descaling solution is

inside the boiler.

Step 3:

After the period of soaking, turn

the steam cleaner upside down

to empty solution from the

boiler. Due to the fact that a

small amount of solution will be

left in the boiler, it is necessary

to rinse the boiler out with clean

water 2 or 3 times. Your steam

cleaner is now ready for use.

Note:

When storing your unit, always

drain any residual water in the boiler and

do not tighten the safety filler cap onto the

unit. Always leave the safety filler cap

loose on the unit when not in use.

Water

•

Use tap water for all your cleaning

needs.

•

However, if you live in an area with

hard water, use de-mineralized /

distilled water when steaming light

colored fabrics to eliminate the

possibility of hard water stains.

IMPORTANT:

Do NOT add cleaning

solutions, scented perfumes, oils or

any other chemicals to the water used

in this appliance. Use tap water or

distilled/purified water if the tap

water in your area is very hard.

Efficient Work

•

For vertical surfaces, wipe with a

towel from the top down, in this

way the dirty water will not soil

surfaces already cleaned.

•

Avoid changing brushes back and

forth while cleaning.

•

Start with the smallest brush to

clean tight spots and corners first.

•

Use a towel to wipe dirt as soon as

possible, otherwise it will dry and

re-adhere to the surface.

OPERATING INSTRUCTIONS

Components

On/Off Switch: The unit is "On" when the

switch is in the "Pushed down" position.

The light on the On/Off switch will illuminate

when the unit is on. The unit is "Off" when

the switch is in its "Up" position.

Heating Light (red): This light will

illuminate when the unit is heating up the

water.

Steam Ready Light (green): When this

light is "On", it indicates that the steam is

ready to use.

CAUTION:

Read the instructions

for "Filling or Re-Filling Your Steam

Cleaner with Water" before opening the

Safety Cap.

CAUTION:

Always unplug before

filling. ALLOW UNIT TO COOL FOR

FIFTEEN (15) MINUTES BEFORE

REFILLING.

IMPORTANT:

Do NOT add cleaning

solutions, scented perfumes, oils or any

other chemicals to the boiler in this

appliance. Use tap water or

distilled/purified water if the tap water in

your area is very hard.

Assembly of Casters

The casters for your new steam cleaner

are packed and shipped unassembled.

To assemble the casters to the base of

the steam cleaner, simply insert the

caster stems onto one of the four (4)

posts on the base and push downward

with the palm of your hand. Repeat for

the next three (3) casters.

Filling or Re-filling Your Steam

Cleaner With Water

IMPORTANT:

Always insure that the

unit is "UNPLUGGED" from the wall

receptacle prior to initial filling or re-filling

the water tank and has been allowed to

cool for 15 minutes. Never attempt to fill

this unit under a water tap, always use

the filling funnel provided.

Before Re-Filling:

Step 1: Press the steam switch on the

hand grip to the "On" position to

vent any remaining steam that is

in the boiler.

Step 2: Press the steam switch to the "Off"

position, turn the unit off, unplug the

unit from the electrical outlet and let

the unit cool for 15 minutes.

Step 3: Plug the power cord into an

electrical outlet, assure that the

On/Off switch is in the Off

position and press

the steam switch

on the hand grip to

the "ON" position to

vent any residual steam

that is in the boiler. (Fig 1)

Step 4: Remove the power cord from the

electrical outlet and turn the steam

switch on the hand grip to the "OFF"

position. (Fig. 1)

Step 5: Place the unit on a flat, stable

surface. Slowly turn the safety

filler cap counter clockwise until it is

removed.

Step 6: Insert the funnel

into the tank

opening and

add 84 US Fl Oz

(2.4L) of water.

(Fig. 2) Place

the funnel in

the tank opening

as illustrated in

Fig. 2. The

funnel has been

specially

designed to show

when the water

tank is full. When

water starts to come out of the vent

hole of the funnel, the tank is full.

Remove the funnel slowly and let

the remaining water in it go inside

the water tank. Do Not Overfill.

Step 7: Replace the Safety Filler Cap.

WARNING:

Allow unit to cool for

15 minutes before refilling. When

refilling the steam cleaner while the boiler is

still hot, there is a risk that water will squirt

back during filling and cause scalding.

Extreme care should be taken when

refilling the unit. Use caution when

opening the Safety/Filler Cap as cap may

become hot during use and escaping

steam can cause scalding.

Fig. 1

Fig. 2