DOMPEL CARRINHO VIENA Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Carrinho de exterior DOMPEL CARRINHO VIENA. DOMPEL CARRINHO VIENA 6 páginas.

Imprimir página
ENGLISH
LOCATION OF INSTALLATION
Install your Dompel product in a level place with no grooves or splices,
preventing rocking and vibration. The location must be airy and it must not
allow straight sunlight and it must be away from sources of heat (stoves,
ovens, etc.) and flammable products. Do not install your product outdoors.
CLEANING AND MAINTENANCE
Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone, kerosene, gasoline, bleach,
thinner, solvents, varsol, vinegar or other chemicals or abrasives such as sandpaper or steel brushes.
To easily clean it, use a solution of warm water with a neutral soap and then wipe dry carefully. If chemical products
reach the upholstery, clean as soon as possible, preventing the products from staining or drying the fabric. The
plastic parts can not be washed with boiling water. Chromed metal components can be cleaned with a soft, dry
flannel, and silicone-based automotive wax can be used to increase gloss and durability, in this case perform the
task following the wax manufacturer's instructions. Perform periodic cleaning, accumulated dust affects the beauty
of the product making it di翿 cult to clean the product.
IMPORTANT
Never drag the product, if necessary, ask other person's help to remove the product from the place. Do
not place containers with high temperature on your product, at the risk of damaging plastic parts or the
upholstery.

INSTALLATION AND ASSEMBLY

Remove all components from the carton. The 4 casters are in a plastic bag inside the carton. The assembly
of this trolley is totally manual and requires no tools.
1
Support the shelf (A) on a flat base and manually fit
the 4 caster supports (D) on the bottom of the shelf.
3
Assemble the first 4 short or long extenders
(E or F) on the top of the shelf (A). Repeat this
process in the following modules.
5
Manually fit the last 4 extenders
(E or F) and the top (B).
Merely illustrative images.
Products may suffer changes in its components without prior warning. If any questions, contact Dompel.
2
Manually fit the 4 casters (C) into the caster supports
(D). Make sure they are well fitted and aligned when
resting on the floor.
4
Fit the shelf (A) into the extenders (E or F). Repeat
this process in the following modules.
6
SECURITY
Avoid accidents. After
unpacking the product, keep
all the pack material out of
children's reach.
Assemble the shampoo/
conditioner bottles (G) in
the top (B). If you prefer,
you can perform this step
before assembling the top
to the structure.
Important! To ensure
safety and prevent
damage to the product,
distribute the weight
evenly over the support
areas and avoid long
displacements on
uneven ground with
maximum load.