DOMPEL MULTIUSO Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Carrinho de exterior DOMPEL MULTIUSO. DOMPEL MULTIUSO 6 páginas. Trolley

Imprimir página
ENGLISH

location of installation

Install your Dompel product in a level place with no grooves or splices,
preventing rocking and vibration. The location must be airy and it must not
allow straight sunlight and it must be away from sources of heat (stoves,
ovens, etc.) and flammable products. Do not install your product outdoors.
cleaning and maintenance
Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone, kerosene, gasoline, bleach,
thinner, solvents, varsol, vinegar or other chemicals or abrasives such as sandpaper or steel brushes.
To easily clean it, use a solution of warm water with a neutral soap and then wipe dry carefully. The plastic parts
can not be washed with boiling water. Chromed metal components can be cleaned with a soft, dry flannel, and
silicone-based automotive wax can be used to increase gloss and durability, in this case perform the task following
the wax manufacturer's instructions. Perform periodic cleaning, accumulated dust affects the beauty of the product
making it difficult to clean the product.
IMPORTANT
Never drag the product, if necessary, ask other person's help to remove the product from the place. Do
not place containers with high temperature on your product, at the risk of damaging plastic parts or the
upholstery.

INSTALLATION AND ASSEMBLY

Remove all the products from the package and follow the steps below
1
3
Fit the casters (D) on the base (A). Make sure
they are well fitted and aligned when resting
on the floor.
5
Manually attach the hair dryer holder (F) to the side hook of the structure tube (B).
Merely illustrative images.
Products may suffer changes in its components without prior warning. If any questions, contact Dompel.
Rest the base (A)
on the floor and
manually fit the
structure tube (B) into
the holes in the base.
2
Fasten the screws (C) using Phillps wrench to
join the structure tube (B) to the base (A).
4
security
Avoid accidents. After
unpacking the product, keep
all the pack material out of
children's reach.
Manually fit the
trays (E) into
the structure
tube supports
(B). Trays are
removable as
needed.