American Standard Pressure Balance Bath/Shower Fitting R125SS Ficha de especificações
Procurar online ou descarregar pdf Ficha de especificações para Mobiliário de interior American Standard Pressure Balance Bath/Shower Fitting R125SS. American Standard Pressure Balance Bath/Shower Fitting R125SS 5 páginas. American standard pressure balance bath/shower fitting specification sheet
Imprimir página
Available Trim Kits
Princeton
Colony Soft
Ceramix
Standard
R120 Valve Body Shown
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch
inlets and outlets (choice of direct sweat or threaded).
Available with screwdriver stops. Rough-in plaster guard
designed for use as thin-wall mounting adaptor. Valve
body will accept a variety of decorative Bath/Shower
trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body:
last a lifetime. Ideal material for prolonged contact with
water.
Ceramic Disc Valve Cartridge:
of drip-free performance. Allows easy control over both
water temperature and volume.
Pressure Balancing Valve Cartridge:
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm
system engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard
water.
Adjustable Hot Limit Safety Stop:
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Exclusive Plaster Guard:
to protect valve during installation and serve as a
mounting plate for thin-wall installations. Two piece
design allows valve to be tested prior to trim
installation.
Wide Rough-in Range:
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R12____, Trim Kit - American Standard Model # ____.____.
© 2006 American Standard Inc.
Reliant+
Reliant 3
Jasmine
Tendence
Durable - Quality that will
Assures a lifetime
Maintains
Limits the
Plaster guard is designed
From 1-5/8" to 3-1/4".
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
MODEL NUMBER:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
Seva
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS
trim.
See reverse for available trim kits.
FINISHED WALL
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 1651mm (65)
AND 1981mm (78)
OPTION 457 mm
(18")
25mm
(1 MIN.)
1/2"
COPPER
102 mm
(4")
TOP OF TUB RIM
BOTTOM OF TUB
B7
UPGRADABLE
41mm TO 83mm
(1-5/8 TO 3-1/4)
VALVE BODY
1/2" NPT
OPTIONS
INLETS
103 mm
(4-1/16")
SHR. 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
INLETS 1/2" NOM.
COPPER SWEAT
103 mm
(4-1/16")
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (R120)
149 mm
(5-7/8")
51 mm
SHR. 1/2" NOM.
(2")
COPPER SWEAT
INLETS
1/2" NPT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
SHR
1/2" NPT
INLETS
86 mm
(3-3/8")
86 mm
(3-3/8")
INLETS
1/2" NPT
TUB PORT
1/2" NPT
THREADED (R125)
149 mm
(5-7/8")
SHR.
(3-3/8")
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
INLETS 1/2" NPT
THREADED (STOPS) (R125SS)
103 mm
(4-1/16")
86 mm