Domyos VE 680 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Bicicleta de exercício Domyos VE 680. Domyos VE 680 10 páginas.

Imprimir página

HEART RATE MONITOR BELT

1. Parts and components

transmitter

2. Installing the battery

• Insert the CR2032 battery (included) as shown below.

• First insert the battery with the + pole upwards.

• Place the seal and then the compartment cover with the two little

dots aligned.

Important !

Ensure that the compartment cover is fully tightened (approx. ½

turn) to avoid sweat or water getting into the compartment.

Speed: This function indicates estimated speed, either in km/h or mph,

depending on the position of the switch at the rear of the product (see

diagram).

Distance: This function indicates estimated distance since the beginning

of the exercise session.

This can be displayed in km (kilometres) or M (miles) depending on the

position of the switch on the rear of the product.

Time: This function indicates how much time has elapsed since the

beginning of the session; this indication is in Minutes : Seconds (MM : SS)

for the first hour, then it switches to Hours: Minutes (HH : MM)

Calories: This function displays an estimation of calories expended since

the beginning of the exercise session.

Switch 1 : Selection of type of apparatus that you are using

with the console: VM (magnetic bike) ---- VE (elliptical bike)

Switch 2 : Selection of unit of measurement for DISTANCE.

MI (Miles) ---- KM (Kilometres)

Switch 3 : Selecting the device's region of use: EU (Europe)/

AS (Asia)

E N G L I S H

Elastic belt

3V CR2032 Lithium Battery

FUNCTIONS

SETTINGS BEHIND THE CONSOLE

SWITCH 1

SWITCH 2

SWITCH 3

Seal

3. Using the belt

• Before placing the transmitter on your chest, moisten the two electrodes

with water or a water-based gel to ensure that the signal is transmitted

correctly.

• Center the heart rate monitor belt under your

breasts or pectoral muscles, directly above your

sternum, with the battery cover facing inwards.

• Adjust the belt so that the transmitter is always in full contact with your

skin. Do not overtighten it to avoid breathing difﬁ culties.

• If the heart rate monitor belt is loose or placed wrongly, you may get

erroneous or irregular readings.

RPM (Revolutions per minute): Number of pedalling rotations per

minute.

Body Fat Level: Body fat level measurement.

Heart rate*: Your heart rate is measured by the pulse sensors on the

handlebars. Your heart rate is displayed in beats per minute.

*Please note: this figure is only an estimate and it should under no

circumstances be considered medically reliable.

*Attention : *Please note: For a period of around 30-40 seconds, or

when there is a sudden change in heart rate, the value displayed may not

correspond to your actual heart rate. This is due to the mechanism starting

up.

*Please note: A strong magnetic field may cause the number of heartbeats

counted to be affected.

Battery compartment cover

DIS connections

RESET