D3 Media 4x4pro Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para Subwoofer D3 Media 4x4pro. D3 Media 4x4pro 8 páginas.

Changing VFC cards

Please note: Take steps to ensure you are free of static electricity before starting the procedure and

ground yourself appropriately. We recommend the use of an anti static wrist strap as well as an anti-static

mat if one is available.

Users can change VFC cards as they require. You can replace one or multiple cards. The following steps are

a guide to help users change over VFC cards. Please read carefully to ensure best practice. If the system

does not work after following these instructions, do not force the VFC cards but call d3 Support as per the

contact details on the last page of this document.

Step 1: Disconnect the system from all sources of power: remove the power cord from input and output,

before changing the VFC cards.

Step 2: Using a Phillips #1 screwdriver loosen the 4 x retaining screws on the VFC card you want to re-

place. The screws are indicated with a red line in the image below.

Red lines indicate screw location. Example shows DP1.2 VFC cards

d3technologies.com