American Standard AquaWash 2.0 SpaLet Seat Manual de instruções de instalação - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação para Casas de banho American Standard AquaWash 2.0 SpaLet Seat. American Standard AquaWash 2.0 SpaLet Seat 8 páginas.

Imprimir página

INSTALLATION

Please read the instructions carefully before installing and using.

WARNING

Remove existing toilet seat.

Place the base plate in the slotted area of the template

and then place the hardware onto the base plate as

shown. Screw in the nuts from the underside of the

ceramic until the base plate is fixed.

BOLT

The product requires a exible supply hose.

The water shutoff valve should be near the installed product for ease of installation.

Do not use in hot water line. Temperature above 104°F / 40°C will damage the product and void your warranty.

BASE

PLATE

NUT

Press the inserts into the toilet bowl holes. Align the

base plate to the slotted area of the template and

then place the hardware onto the base plate as

shown. Using a medium size Phillips screwdriver,

start screwing down the bolts into the inserts until

the base plate is fixed.

If the insert does not fit the bowl, proceed to Step 2B,

otherwise, skip Step 2B

and continue with Step 3.

Slide the SpaLet

seat across the base plate until you hear

a click. The SpaLet seat is now assembled to the bowl.

Turn off the water supply by turning off the water shutoff

valve, then disconnect the supply hose.

If you are using a rigid supply line you will need to

purchase a flexible supply hose to install the SpaLet seat.

- 3 -

BOLT

BASE

PLATE

760294-100