ekco EV55SE Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Amplificador ekco EV55SE. ekco EV55SE 13 páginas. Valve integrated amplifier
Também para ekco EV55SE: Manual do utilizador (12 páginas)

Imprimir página
Standard Wiring
The main loudspeakers should be connected to the "A" terminals. Connect the Left
Loudspeaker to the Left channel of the amplifier. Connect the Red (Positive) terminal of
the loudspeaker to the +VE terminal of the amplifier. Connect the Black (Negative)
terminal of the loudspeaker to the –VE terminal of the QUAD II Classic Integrated
amplifier. Now connect the Right Loudspeaker to the Right channel of the amplifier.
Ensure that the Left and Right loudspeakers are connected to the Left and Right
channels respectively.
If you have another pair of loudspeakers in a different location you can connect them to
the "B" terminals.
RIGHT
SPEAKER
Bi-Wiring
Bi-wiring is a technique whereby the treble and bass sections of a loudspeaker are
independently connected to the relevant channel of the amplifier. If your loudspeakers can
be bi-wired, you may certainly bi-wire the amplifier to the loudspeakers if you wish. Follow
the recommendations in your loudspeaker user handbook.
RIGHT
SPEAKER
Connecting the Mains
Set the ON/OFF switch on the rear panel to the "0" OFF position.
Ensure that the volume control on the front panel is at the minimum (fully anticlockwise)
position.
Plug the supplied IEC lead into the mains input socket.
Now plug the IEC lead into the wall socket and switch on at the mains point.
Plug in the mains leads and switch on the power to your source units. The system is now
fully connected and ready for operation.
To "Speakers B"
To "Speakers B"
6
LEFT
SPEAKER
LEFT
SPEAKER