Da-Lite Multi Format Imager Livro de instruções - Página 6

Procurar online ou descarregar pdf Livro de instruções para Acessórios para projectores Da-Lite Multi Format Imager. Da-Lite Multi Format Imager 12 páginas.
Também para Da-Lite Multi Format Imager: Livro de instruções (20 páginas)

Imprimir página

Wall Mounting Assembly

Depending on size of screen it will be shipped with either 2

wall brackets that are 48" long or 2 wall brackets that are 64"

long. Two small L brackets included will be used to hold

frame securley to wall at bottom.

2. To install the Dual Format lmager over a Da-Lite Perm-Wall

screen you will need to place the supplied wooden spacers

between the screen and the wall.

NOTE: Da-Snap, lmager and Cinema Contour frames do not

require any spacers.

3. Refer to Figure 9 hanger bracket location. Dimension A will

vary depending on the type of screen you have. Dimension A

is measured from the top of the screen frame to the top of

the hanger bracket.

Screen Type

Cinema Contour

Perm-Wall

lmager

Da-Snap

4. Both wall brackets must be mounted into at least two wall

studs. Check to make sure both brackets are vertically level

with each other.

5. Drill holes and attach mounting brackets into wall. You will

need at least 4" clearance above the drilled holes to hang the

screen. Dimension for hole is shown from the top bracket to

center hole position. It is recommended to use a 1/4" x 1 1/2" lag

screw (not supplied) to fasten bracket to wall.

Dimension A

3-3/4"

4-3/4"

5-1/4"

Figure 9

1 1/2"

Figure 10