American Standard Right Height Elongated Toilet Triumph Cadet 3 Especificações

Procurar online ou descarregar pdf Especificações para Casas de banho American Standard Right Height Elongated Toilet Triumph Cadet 3. American Standard Right Height Elongated Toilet Triumph Cadet 3 1 páginas. 2-piece round front, elongated, right height toilets
Também para American Standard Right Height Elongated Toilet Triumph Cadet 3: Ficha de especificações (1 páginas), Ficha de especificações (1 páginas), Ficha de especificações (1 páginas), Ficha de especificações (1 páginas), Ficha de especificações (1 páginas), Instruções de instalação (4 páginas), Instruções de instalação Cuidados e manutenção (13 páginas), Instruções de instalação Cuidados e manutenção (4 páginas), Instruções de instalação Cuidados e manutenção (4 páginas), Manual do Proprietário (8 páginas)

Imprimir página
American Standard Right Height Elongated Toilet Triumph Cadet 3 Especificações
TRIUMPHCADET
3
®
RIGHTHEIGHT™ELONGATEDTOILET
❑
2492.016
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/.6 gpf)
• 6-/2" rim height for accessible application
• Features the Cadet®3FlushingSystem
• Elongated siphon action jetted bowl
• Fully-glazed 2-/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect™ tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 00% factory flush tested
• 5 year warranty
❑
3016.016 Right Height™ Elongated Bowl
❑
4007.100 Tank
NominalDimensions:
768 x 472 x 784mm (30-/4" x 8-9/6" x 30-7/8")
Fixture only, seat and supply by others
AlternateTankConfigurationsAvailable:
❑
4007.500 Tank complete with Aquaguard Liner
ComplianceCertifications-
MeetsorExceedstheFollowingSpecifications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
ToBeSpecified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: #5325.00 Elongated Champion
solid plastic seat and cover with easy lift off feature
❏ Seat: #5284.06 Elongated EverClean™
anti-microbial solid plastic seat and cover
❏ Seat: #53.02 Elongated Laurel molded wood
seat and cover
❏ Supply with stop:
© 2007 American Standard Inc.
RIGHTHEIGHT™ELONGATEDTOILET
FINISHED WALL
237mm
(9-5/16)
305mm
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A2.9.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
Slow Close
®
BUILDING FACILITIES-CHECK LOCAL CODES.
TRIUMPHCADET
768mm
(30-1/4)
25mm ± 6mm
(1 ± 1/4)
464mm
(18-1/4)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
419mm
(16-1/2)
213mm
356mm
FINISHED
(8-3/8)
(14)
FLOOR
C/L OF OUTLET
3
®
VITREOUSCHINA
472mm
(18-9/16)
784mm
(30-7/8)
SUPPLY
AS
REQ'D.
*352mm
*203mm
(13-7/8)
(8)
238mm
(9-3/8)
*152mm
(6)
Revised
08/07