eKey CP DRM Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Sistema de segurança eKey CP DRM. eKey CP DRM 2 páginas. Access system with fingerprint scanning

Imprimir página

QUICK START GUIDE

ekey home CP DRM

Access system with fingerprint scanning

1 Note on this document

This quick start guide is not subjec t to

updating . Subject to op tical and tec hnical

modifications,

any

liab ility

excluded.

ID15/142/0/52:

Version

dated

22.6.2012

2 Intended use

The ekey home system consisting of ekey home finger scanner, ekey home control panel and

ekey power supply is a biometric access control system available in different hardware makeups

and component combina tions. I t captures the unique fea tures (minutea) of the fingerlines, which

are then compared to the master templates saved in the finger scanner. To authentica te a finger

successfully, a certain degree of identicalness (threshold) has to be reached. Based on this, a

given switching actua tor is activated (relay output situated on the control panel). The system

has been primarily developed for opening front doors, apartment doors, garage doors, etc. in a

residential, corporate and limited ind ustrial environme nt. I t has to be ins talled in a f ixed

position, and in accordance with the accompanying mo unting ins truc tions and wiring diagrams .

3 Product liability

In the below listed cases, the security, the protec tion and the fla wless operatio n of the device

may be impaired. The liability for the operability of the equipment and its safe operation is

transferred to the opera tor / adminis trator / user:

The device is not operated, ma intained and cleaned in accordance with the

respective manual.

The device is used o utside of the applica tion area specified herein, e.g . in

automotive app lications , hazardous areas, safety-critical applications (thereat to life

or physical conditio n).

The operator carries out unauthorized changes on the devices.

The device ist not operated with the recommended voltage sup ply (safety extra low

voltage – SELV).

The system components are no t connec ted electrically as stip ulated in the

respective wiring diagram.

4 Start-up

Before you start programming the system with the help of this

quick start guide, the system must be mounted and wired

according to the mounting instructions and wiring diagram

supplied with the device. Please follow the steps below:

1.) Make everything you need ready to mount the devices as

described in the mounting instructions supplied with the devices.

2.) Wiring

Do not connect the system to the mains yet! The electrical

connection of the system can only be carried out by a

specialist!

Connect the wires as described in the ekey home wiring diagram

supplied with the devices.

3.) Check the wiring.

4.)

Conclude mounting the devices. Close all the device housings

which you have had to open in order to be able to proceed with the

wiring.

5.) Read carefully the following chapter

„5

Operating

the finger scanner". The correct

operation (i.e. swiping the finger over the sensor) of

the fingerprint scanner is decisive for the proper

functioning of the whole system.

6.) Connect the power supply to the mains.

The electrical connection of the system can only be carried out

by a specialist!

The ekey home CP DRM displays the language selection

The ekey home finger scanner indicators are as follows:

ekey home FS WM

ekey home FS IN

ekey home FS OM

flashing

orange

7.)

Now start at point A: INITIALIZING THE DEVICES of

„Programming the system".

5 Operating the finger scanner

5.1 Function of the finger scanner

The function of the finger scanner is to capture and analyze the image of your finger, and then

compare it with a reference template. Which part of your finger should be captured?

Finger nail

for

misprints

3rd phalanx

Finger

image

(phalanx distalis)

(papillary

lines)

of the

3rd phalanx

2nd phalanx

(phalanx media)

A finger scanner works like a camera. It makes a picture of the bottom side, the papillary lines, of

your finger´s third phalanx. However, this picture must be of good quality, so that physical access

can be granted whenever necessary.

Imagine you wish to make a picture of someone, and this person

keeps fidgetting

runs by and you try to make a picture of him at that exact moment

hides half of his face behind a tree

etc.

What do you think these pictures will look like? On some of the pictures you will not even be able

to recognize the person.

The finger scanner works in the same way. The finger scanner can only read all the information

contained in your finger, and consequently open your doors securely and reliably, if you move

your finger down across the sensor evenly and in the right position.

Let us now look at where you should place your fingers and at which speed you should move them

across the sensor, so that the „pictures" of your fingers are perfect.

5.2 The finger recess – the control element

The finger recess allows to place the finger correctly so that a finger picture of good quality

can be captured. It actually is the control element and consists of

right and left recess edges.

6. Programming the system with the ekey home CP DRM

6.1 Function of the control panel

The function of the ekey home CP DRM in ekey home is to

program and parametrize the system. Using the

LCD display and the

4 buttons,

you can

delete users

enter the security code

change the security code

change the relay switching times

reset to factory settings

...

The menu navigation is intuitive and very easy. You will

find step-by-step detailed explanations of each specific

menu function below.

5.3 Operating correctly the finger scanner

It is necessary to capture an image of the 3rd

phalanx. On the contrary, your finger scanner

will not function properly.

In order to ensure this, take care to operate the

finger scanner correctly. It is fundamental to

place your finger correctly in the finger recess

and move it down across the sensor at the right

speed. Ergonomically speaking the best fingers

are the index, the middle finger and the ring

finger.

The thumb and the little finger may

not be used!

Ideally, when positioning your

finger on the finger recess, stretch

the remaining fingers, holding them

close to the „swiping" finger. This

helps keep the „swiping" finger

5.4 What you should not do

Left and right recess

edge

Place your third phalanx

higher than the pin point

PIN POINT

SENSOR

pin point - sensor –

6.2 Controls and their symbols

The LCD display guides you through the menu,

displays status information and allows you to

make specific settings.

Lay your finger straight and flat

on the finger recess.

BE SURE to place

Place the middle

your finger

of your third

exactly in the

phalanx directly

middle of the

on the finger

area between

recess

point.

both finger

recess edges.

Now without changing the inclination of your finger, move it down

across the sensor (the entire hand). Take care to swipe your finger

at the right speed. BEWARE: The entire movement (swipe) should

take about

If you swipe your finger too fast, then the status LED on the pin

point will light up red.

Do not modify the position of the finger phalanges during the swipe

(e.g. by bending the third phalanx).

There is no need to exert any

finger across the sensor as if you would wipe bread crumbs off a

table.

even.

Not place your finger in the middle

Rotate your finger in the

of the finger recess, or not place it

finger recess.

parallel to the finger recess edges.

speed >>

speed <<

If you move your finger across the finger scanner in one of the

ways mentioned here, then the scanner will not be able to

Move

your

extract the information it needs about your finger image. It

will therefore not function properly:

finger too fast

Poor recognition performance: You will have to swipe your

or too slowly

across

the

finger several times across the sensor before being able to

sensor.

induce the door to open.

Reference templates cannot be saved: You are not able to

save a finger in the system.

6.3 Programming the system

Now start programming the system. The menu

sequences

explained below in this document. Let us not

forget to mention the security code. You need it in

The OK button allows you to register

order to be able to make changes in the system.

values and move to the next menu level.

The factory default setting for this code is

99. Change this code to another one of your

The down arrow / right arrow button

choice as soon as you have started up the

allows you set values and navigate in the

system.

menu.

The up arrow / left arrow button

allows you to set values and navigate in

the menu.

The ESC button allows you to exit a

menu level or to cancel entries.

Take care to

position your

finger as flat as

possible over the

finger recess.

1-1,5 sec

stronger

pressure. Move your

Place your finger at a too

steep angle with the

finger recess.

for

each

single

function

are

Security code

Factory setting