Canon Color imageCLASS MF8350Cdn Manual de iniciação - Página 23
Procurar online ou descarregar pdf Manual de iniciação para Impressora tudo em um Canon Color imageCLASS MF8350Cdn. Canon Color imageCLASS MF8350Cdn 28 páginas. Canon imageclass mf8350cdn: quick start
Também para Canon Color imageCLASS MF8350Cdn: Manual de iniciação (33 páginas), Manual de iniciação (29 páginas)
Imprimir página
1
2
Preface
Installing the Machine
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions,
handling precautions, and instructions that should be observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death or injury to
persons if not performed correctly. To use the machine safely, always pay attention
to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if
not performed correctly. To use the machine safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items
carefully to operate the machine correctly, and avoid damage to the machine or
property.
Keys and buttons used in this manual
The following symbols and key names are a few examples of how keys to be pressed
are expressed in this manual.
•
Operation panel keys: [Key icon] + (Key name)
Example: [
] (Stop)
•
Display: <Apply>
•
Buttons and items on the computer display: [Control Panel]
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the
machine.
As these instructions are intended to prevent injury to the user and other persons or
destruction of property, always pay attention to these instructions and operational
requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any
operation unless otherwise specified in the manual.
Installation
WARNING
•
Do not install the machine in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or electrical shock.
•
Do not place the following items on the machine.
If these items come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn off the
power switches of the machine and computer (1) and disconnect the interface
cable if it is connected (2). Then, unplug the power plug from the AC power outlet
(3) and contact your local authorized Canon dealer.
-
Necklaces and other metal objects
-
Cups, vases, flowerpots, and other containers filled with water or liquids
(1)
•
When installing and removing the optional accessories, be sure to turn the
machine off, unplug the power plug, and then disconnect all the interface cables
and power cord from the machine. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
3
Configuring and Connecting the Fax
(2)
(2)
(3)
(1)
4
Connecting to a Computer and
Installing the Drivers
CAUTION
•
Do not install the machine in unstable locations, such as on unsteady platforms
or inclined floors, or in locations subject to excessive vibrations, as this may cause
the machine to fall or tip over, resulting in personal injury.
•
The ventilation slots are provided for proper ventilation of working parts inside
the machine. Never place the machine on a soft surface, such as a bed, sofa, or
rug. Blocking the slots can cause the machine to overheat, resulting in a fire.
•
Do not install the machine in the following locations, as this may result in a fire or
electrical shock.
-
A damp or dusty location
-
A location exposed to smoke and steam, such as near a cookery or humidifier
-
A location exposed to rain or snow
-
A location near a water faucet or water
-
A location exposed to direct sunlight
-
A location subject to high temperatures
-
A location near open flames
•
When installing the machine, gently lower the machine to the installation site so
as not to catch your hands between the machine and the floor or between the
machine and other equipment, as this may result in personal injury.
•
When connecting the interface cable, connect it properly by following the
instructions in this manual. If not connected properly, this may result in
malfunction or electrical shock.
•
When moving the machine, follow the instructions in this manual to hold it
correctly. Failure to do so may cause you to drop the machine, resulting in
personal injury.
e-Manual "Transporting the Machine"
Power Supply
WARNING
•
Do not damage or modify the power cord. Also, do not place heavy objects on
the power cord or pull on or excessively bend it. This can cause electrical damage,
resulting in fire or electrical shock.
•
Keep the power cord away from all heat sources. Failure to do so can cause the
power cord insulation to melt, resulting in a fire or electrical shock.
•
The power cord should not be taut, as this may lead to a loose connection and
cause overheating, which could result in a fire.
•
The power cord may become damaged if it is stepped on, fixed with staples, or if
heavy objects are placed on it. Continued use of a damaged power cord can lead
to an accident, such as a fire or electrical shock.
•
Do not plug or unplug the power plug with wet hands, as this can result in
electrical shock.
•
Do not plug the power cord into a multiplug power strip, as this can result in a fire
or electrical shock.
•
Do not bundle up or tie up the power cord in a knot, as this can result in a fire or
electrical shock.
•
Insert the power plug completely into the AC power outlet. Failure to do so can
result in a fire or electrical shock.
•
If excessive stress is applied to the connection part of the power cord, it may
damage the power cord or the wires inside the machine may disconnect. This
could result in a fire. Avoid the following situations:
-
Connecting and disconnecting the power cord frequently.
-
Tripping over the power cord.
-
The power cord is bent near the connection part, and continuous stress is
being applied to the power outlet or the connection part.
-
Applying a shock to the power connector.
•
Do not use power cords other than the one provided, as this can result in a fire or
electrical shock.
•
As a general rule, do not use extension cords. Using an extension cord may result
in a fire or electrical shock.
•
Remove the power plug from the AC power outlet and refrain from using the
machine while it thunders. Lightning can result in a fire, electrical shock or
malfunction.
Appendix
17