Daan Tech Bob Manual de início rápido - Página 12

Procurar online ou descarregar pdf Manual de início rápido para Máquina de lavar loiça Daan Tech Bob. Daan Tech Bob 14 páginas.

Imprimir página

4 | QuiCK troubleShootinG

Guide

1 | l

iSt of poSSible iSSueS

Issue

Possible causes

A fuse has blown in your

electrical system or the circuit

breaker has tripped.

Bob does not turn on.

The power supply is not

activated.

The door is open.

The door remains open,

impossible to close it.

The cycle does not start.

No water or not enough water

in the tank.

The screen is frozen and the

buttons no longer respond.

The drain hose is bent.

Water does not drain out

The water outlet is blocked

of Bob.

(under the filter).

The drain hose is blocked by a

foreign body/material.

Known solutions

Unplug all other appliances

connected to the same electrical

circuit as Bob. Replace the fuse or

reset the circuit breaker.

Check that the power cord is properly

plugged at both ends into either the

wall outlet or at Bob's side.

Close the door.

Check whether something is

blocking the closing of the door. If

it is not the case, please contact the

After Sales Service.

If you are in the "integrated tank"

mode: fill the tank up until the signal

sounds.

If you are in the "water supply" mode:

check your installation (tap open,

sufficient pressure).

Wait 3 seconds until Bob has started.

If the screen is still frozen, disconnect

and reconnect Bob.

Check the drain hose and fix it with

"Bob Easyfix".

Clean the bottom of the interior and

the filters.

Contact your seller's after-sales

service..

Issue

Possible causes

Inappropriate detergent.

Formation of foam inside

the tank during a cycle.

Soil that generates foam.

Stains on interior

Limescale may appear on the

surfaces.

The dishes are not placed

correctly in the basket.

The selected wash program is

unsuitable.

The dishes are not clean.

The spray arm is blocked by

dishes.

One or more of the spray arm

nozzles is/are clogged.

The filter are not clean or are not

correctly arranged.

Known solutions

Only avoid special dishwasher

detergent to avoid foaming. However,

if this happens, open the dishwasher

door and

allow the foam to evaporate.

Close the door and start a wash

program to drain the water. Repeat

the procedures if necessary. Reduce

the amount of product in the next

cycle.

Different types of soil generate more

or less foam. However, if there is too

much foam during a cycle it can

block the spray arm. In this case,

empty the basket and run an empty

cycle before you start washing your

dishes again.

Pour 10cl of white vinegar into Bob's

tank and run an intensive cycle.

Avoid any contact between the

different items in the basket. Please

refer to: Recommendations for the

arrangement of the dishes in the

basket.

Choose a more intensive program.

Refer to: Standard programs

Change the arrangement of the

dishes so that the spray arm can

rotate freely.

Disassemble and clean the spray

arm.

Disassemble and clean the filters.