Daavlin 7 Series Manual de operação - Página 11
Procurar online ou descarregar pdf Manual de operação para Equipamento médico Daavlin 7 Series. Daavlin 7 Series 13 páginas. Integrated dosimetry with link control
Também para Daavlin 7 Series: Manual de instalação (2 páginas)
Imprimir página
DO NOT REPLACE LAMPS INDIVIDUALLY. ALL LAMPS SHOULD BE REPLACED AT THE SAME TIME TO
AVOID UNEVEN TREATMENTS OR BURNS. PLEASE CONTACT THE DAAVLIN SERVICE DEPARTMENT
PRIOR TO REPLACING YOUR LAMPS TO OBTAIN IMPORTANT INFORMATION ON HOW THE OUTPUT
OF YOUR UNIT WILL BE AFFECTED BY THE CHANGE.
Because of differences between brands, replace lamps with the same brand as originally installed. A Lamp
Specification Guide is located below.
Lamp Specification Guide
-F72T12BL/HO
-060OF72HO BL
Lamp Replacement
1. Consult the Lamp Specification Guide for replacement lamp specifications and contact the Daavlin
service department for a lamp replacement quote.
Note: The Daavlin service department can be reached toll free by dialing 1-800-322-8546 or via email
2. Once you have received your replacement lamps unplug the machine. Then, using either a 5/16" hex
driver/socket or a #2 Philips head screw driver, remove the screw from the bottom of each grid.
3. Lift each grid out of its holes in the bottom lamp plate, pull the bottom of the grid forward, then slide it
out of the holes in the top of the unit and set it aside.
4. Grasp the lamp to be removed with both hands and press down until it clears the top socket, then
remove the lamp. Reverse the process to install lamps and grid.
5. Reset the lamp hours to zero.
Resetting Your Lamp Hours
Whenever the lamps are changed in your device, it is important to reset the lamp age to zero so the new
lamp's operation hours can be tracked. Please contact the Daavlin service department for instructions on
resetting your device's lamp hours.
Uploading FlexRx Refill Prescriptions
When specified by your prescribing physician, Daavlin home phototherapy devices are equipped with FlexRx
exposure limiting software. Each time the lamps are turned on, the number of available exposures is reduced
by one.
If your device is equipped with FlexRx, upon "waking up" the screen will display pre-set reminders of how many
exposures are remaining. To ensure there are no interruptions in your therapy, we suggest that you contact
your physician for a "refill" when 5 to 10 exposures remain. Once you have completely run out of exposures on
your unit, the controller will prompt you to upload a new FlexRx prescription.
MANU0140
Rev. 0
2/2019
UVA
or
-FS72T12/NBUVB/HO/RDC/100W
Narrow Band
UVB
-TL-01/100W-FS72
or
11
Broad Band
UVB
-FS72T12HO