American Standard Cadet Elite 2772E Características e dimensões - Página 2
Procurar online ou descarregar pdf Características e dimensões para Banheira de hidromassagem American Standard Cadet Elite 2772E. American Standard Cadet Elite 2772E 2 páginas. 5' x 42" whirlpool
Também para American Standard Cadet Elite 2772E: Lista de peças (1 páginas)
Imprimir página
305 mm
(12)
235 mm
(9-1/4)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
1067mm
(42)
533mm
(21)
C/L OF
57 mm
SUPPLIES
(2-1/4)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
76mm
(3)
502 mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
SUPPORT
FEET
GENERAL SPECIFICATIONS FOR 2772E WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE
INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE
ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or
voided leaflet.
WHIRLPOOLS BY AMERICAN STANDARD
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
1524mm
(60)
RECOMMENDED FITTING LOCATION
76 X 330mm (3 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
229 mm
(9)
CUTOUT IN FLOOR
PUMP
FOR DRAIN
(8) JETS
(2) AIR VALVES
ALT. FITTING LOCATION
C/L OF
SHOWER ARM
305mm
38 mm
(12)
(1-1/2)
IN-LINE HEATER
102 mm
REMOVABLE
(4)
BLANK
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.TAILPIECE
60 x 42 x 19-3/4 In.
(1524mm x 1067mm x 502mm)
117 Lbs. (53 Kg.)
642 Lbs. (289 Kg.)
40 x 26 In. (1016 x 660mm)
52 x 32-1/2 In. 1321 x 826mm)
13-1/4 In. (337mm)
37 Lbs./Sq. Ft. (182 Kgs/Sq. m.)
1.6 HP, 9.7 AMPS, 120V.
© 2003 American Standard Inc.
CADET ELITE™ 5' x 42"
HIGH GLOSS ACRYLIC
ON/OFF
SWITCH
OUTLINE OF CUTOUT
1486mm x 1029mm
(58-1/2 X 40-1/2)
C/L OF
VALVES
C/L OF
SPOUT
LEVELING
STRINGER
NOT FOR
SUPPORT
464 mm
(18-1/4)
70 mm
(2-3/4)
117 mm
(4-5/8)
63 Gal. 239 L.)
54 Gal. (204 L.)
27.8
45.4