EKHO EK-WL8-AU Manual de Descrição Geral - Página 4
Procurar online ou descarregar pdf Manual de Descrição Geral para Alarme de fumo EKHO EK-WL8-AU. EKHO EK-WL8-AU 8 páginas. Wireless optical smoke sensor with integrated voice annunciator and visual alarm device (vad)
Imprimir páginaSTFV.425238.037-AU-UM rev. 24
PROGRAMMING
The "Prog." (or "P") button on the device is used for initializing the device in the
system. Please refer to the translator manual for full instructions on how to add a
device to the system. The device can also be initialized using the "Ekho Configuration"
software.
INDICATION
The device has a three-color LED which indicates the state according to the following:
LED indication
No indication or green flashes
Yellow flashes every 4 seconds
Red flashes every 2 seconds
When the device is powered up, an automatic calibration process will begin, this lasts
around one minute and is indicated with a red flashing LED.
SMOKE SENSITIVITY
WL8-TRH
vXX/RFYY
Configuration
Maintenance
3 sensitivity options are available, these can be selected only by using the translator
menu or the Ekho configurator software (setting via the control panel will have no
affect and sensor will remain in the selected mode).
NOTE When the device is powered up, an automatic calibration process will begin,
this lasts around one minute and is indicated with a red flashing LED.
Password
Radio
Signal line
Start Addr
EK-WL8-OV/AU
WIRELESS OPTICAL SMOKE SENSOR
WITH INTEGRATED VOICE
ANNUNCIATOR AND VISUAL ALARM
DEVICE (VAD)
06.11.2020
Device's state
Standby mode
Fault state – malfunctioning smoke sensor
Fire alarm
001 wl8-trh
002 wl8-ov
003 wl8-oh
Page 4 from 8
Delete
Edit
sensitivity
Init
Info
Photo
Normal
High
Low
4